Ray-Ban Meta glasses come with a charging case. Your glasses charge while docked in the case and you can charge your case using a USB-C cable.
Charging your glasses
The first time you charge your glasses you will need to remove the protective plastic tab from the metal charging connections on the case.
To charge your glasses:
- Place your glasses in the charging case with the nose bridge of the glasses connected to the charging port.
- This is the only way to charge the glasses.
- You’ll know that your glasses are charging when the case LED blinks after you’ve docked the glasses and closed the case.
- If your glasses are turned on and paired with the Meta AI mobile app, you can check the charging status in the app.
Charging your case
To charge your case:
- Připojte pouzdro k napájecímu adaptéru pomocí kabelu USB-C tak, že jej zasunete do spodní části nabíjecího pouzdra.
- Zapojte napájecí adaptér do zásuvky.
Charging cable requirements:
- USB-C na USB-C nebo USB-C na USB-A (v souladu se standardem USB-C)
- Každá generace USB by měla být kompatibilní
- Minimálně 1,2 A (kabely s nižším proudem stále fungují, ale s nižší rychlostí nabíjení).
Power adapter requirements:
- Nabíječky kompatibilní s USB-C nebo USB-A
- 5 W nebo více (nabíječky s nižším výkonem budou pravděpodobně stále kompatibilní, ale doba nabíjení může být pomalejší).
- USB-PD (napájení) není podmínkou
Check the charge level of your glasses and case
Your glasses and case each have a battery that requires charging. You can check the charge level of your devices using the Meta AI mobile app or your charging case.
From the Meta AI mobile app
- When your glasses are connected to the Meta AI mobile app, you’ll be able to see the charge status of your glasses in the
Devices tab.
- If your glasses are docked in the case, you will also see the charge level of your case.
Z nabíjecího pouzdra:
Nabíjecí pouzdro má na přední straně diodu LED, která ukazuje úroveň nabití brýlí a pouzdra.
- When your glasses are docked in the case, you can press the button on the back of the case to see the charge level of your glasses on the case LED.
- When you remove your glasses from the case, the case LED will show the charge level of your case. You can also press the button on the back of the case when it’s empty to see the charge level of the case.
| Case LED status | What it means |
| Green solid light | Case fully charged |
| Orange solid light | Case not fully charged |
| Orange blinking light | Low battery |
| Red blinking light | Charging error |
You can learn more about the case LED in the Meta AI mobile app:
- V mobilní aplikaci Meta AI klepněte na možnost
- Přejeďte prstem dolů a ťukněte na položku Zobrazit všechny vedle Poznávání a zkoumání.
- Přejeďte prstem dolů a ťukněte na položku Learn about gestures & LEDs.
Charging safety
For safety information on charging your Ray-Ban Meta collections please refer to the Safety and warranty guide.
Do not store non-Ray-Ban Meta smart glasses inside the charging case, including Ray-Ban Stories. This could result in damage to both the non-Ray-Ban Meta glasses as well as the charging case.
Troubleshoot red blinking light (charging error) and power issues
There are a few reasons why you may be receiving a charging error:
- Liquid detected: Liquid is interfering with the charging interface between the nose bridge of your glasses and the charging case. Wipe the charging contacts clean on both devices and try again.
- High temperature: The charging case has reached a temperature that is too high to charge your glasses. Move your case into a cooler location.
- Incompatible charger: Case cannot charge due to the charging cable or power adapter being used. Try using a different cable or power adapter based on the recommendations in the Charging your case section of this article.
Your glasses may not be powering on due to not being able to charge when docked. Dried sweat, dirt and liquid can all cause interference between the nose bridge of your glasses and the charging case. Thoroughly clean both devices, then try to charge again. Learn more about cleaning your Ray-Ban Meta smart glasses.
Troubleshoot case charging issues
While the majority of USB-C cables should work with the charging case, there are some specific chargers that might not be compatible with the charging case. If you are using one of these incompatible chargers, you might see:
- A persistent pulsing orange or green pattern on charging case LED.
- Missing charging icon in the Meta AI mobile app.
If you are running into issues with charging your charging case, try connecting a different USB-C cable to your case. If the case is still not charging, try using a different power adapter. Replacement charging cases, USB-C charging cables a power adapters are available for purchase in the Meta Store.
